Add a Mercedes W212 Key via Xtool X100 PAD3 + KC501 on Bench

Hello, guys! Today I wanna use the Xtool X100 PAD3 (X100 PAD Elite) + KC501 tool to program a key for Mercedes Benz E-class W212 on the bench. 

As you can see, here are the Mercedes dashboard and EIS modules, an original key and a new blank key, everything are in connection for ready.

So here we go to the Xtool X100 PAD3 tablet,

Diagnosis >> Benz >> Agree >> Infrared key system >> Password calculation >> Data collection >> With programmed key

Connect KC501 to X100 PAD3.

Insert the original key into the EIS.

Wait for 5 seconds, then remove the original car key from the EIS.

Press “OK”.

Select the communication method with EIS, press “OK”.

Read via OBD >> Automatic identify

Insert the original key into the lock.

Wait for 5 seconds, then remove the original car key from the lock.

Press “OK”.

Insert the original key into the infrared key slot of KC501, press “OK”.

Record the password, press “OK”.

Return back to an infrared key system, 

EIS functions >> Read EIS information >> Read via OBD >> Automatic identify >> OK

We can check the key information here.

F2 >> OK >> Input password, key location and format, press “OK”>> OK

The file is saved, press “Yes” to write data into the blank key.

Connect KC501 to the device, insert a new key into KC501 infrared key slot, press “OK”.

Writing data...

Write successfully, press “OK” to finish.

Let me try the new key, it can start the ignition now!

This is using Xtool X100 PAD3 and KC501 key programmer to add a key for Mercedes W212, key programming has done!

http://blog.obd2shop.co.uk/add-a-mercedes-w212-key-via-xtool-x100-pad3-kc501-on-bench/

Infiniti M45 Key Programming via XTOOL X100 PAD3 in 4 Mins

Today I’m going to try to program a key for the 2006 Infiniti M45 via XTOOL X100 PAD3 key programmer. I will use a pre-owned existing key to the program.

Connect XTOOL X100 PAD3 to the OBD2 port of Infiniti, then let’s start:

Diagnosis >> Infiniti >> Agree >> Read bcm code and release steering lock(4 pincode) >> Read BCM code >> OK

Release steering lock >> OK >> Switch ignition off, press “OK”>> Input pincode >> Success, press “OK”

Go back to previous menu, press “Program keys”>> Select from type >> Immobiliser system >> 4 pincode >> Type 1(KWP)

Insert the key and switch ignition on, press “OK”>> Program keys >> OK >> Input pincode, press “OK”

Follow the prompts, press “OK”

1. Switch ignition off and remove key;

2. Inset the first key and switch on for 5 sec, then switch the ignition off and remove key;

3. If you want to add more keys, please repeat procedure 2, complete.

Okay, let me test the new key, it can work normally, programming is successful.

This is a 2006 Infiniti M45 key programming demonstration using XTOOL X100 PAD3. It is quite easy and fast to be done in 4 minutes.

http://blog.obd2shop.co.uk/infiniti-m45-key-programming-via-xtool-x100-pad3-in-4-mins/

BMWCAS4 Key Programming via XTOOL X100 PAD3

How to program a smart key for BMW CAS4 with XTOOL X100 PAD3 key programmer? Today I wanna make a quick description of the procedure.

Here are BMW smart keys, the right one is original key and the left one is new key to be programmed.

Turn on X100 PAD3 tablet, inset cables to BMW OBD port, now let’s start to match the keys:

Diagnosis >> BMW >> OK >> Match key >> Yes 

Connect X100 PAD3 with internet >> Click “Back” button >> OK

You can see vehicle information displayed on the screen now: including CAS type, CAS number, VIN code, etc. Click “OK” to go on.

You can see keys information 1-10 displayed here, key pos1 & pos2 are used while key pos3-10 are unused.

Choose an unused key pos, I am choosing key pos10 here, then click “Key Match”>> Yes >> Requires original car key to operate

Keep the original car key close to sensing area, then click “OK” .

Put the new key at car induction coil, then click “OK”.

New smart key is successful programmed! Click “OK”

As you seen, the key pos10 turns out to be used now.

Okay, let me test the keys to see if they can work normally.

Both original key and new car key can work well after successful programming.

Job has done! It is easy and fast to finish in 3 minutes.

This is an operation tutorial of 2014 BMW key programming using with XTOOL X100 PAD3 auto key programmer. 

More tests to be updated...

Article source: http://blog.obd2shop.co.uk/bwm-cas4-key-programming-via-xtool-x100-pad3/