CGDI Prog BMW MSV80 + Godiag Platform Program FEM BDC Key

This is a demo of how to use CGDI Prog BMW MSV80 key programmer working with GodiagCAS4/CAS4+Test Platform to program a key for the FEM BDC box.

Connection

1. Insert wires to connect with GodiagTest Platform, GT100 Break Out Box, CGDI Prog BMW and FEM BDC box.

2. Put a BMW key on Godiag Test Platform, turn the switch on.

The indicator lights are on, which means the connection is successful, the FEM BDC box can work normally.

FEM/BDC Key Match

Open CGDI software on a computer, click “FEM/BDC Key Match”.

Key data will display on left side.

Main key programming functions are on right side:

Including generate dealer key, recovery code, delete key, enable key, disable, mileage reset, exit shipping mode, replace FEM/BDC, write EEPROM, backup FAFP, restore FAFP, reset starter lock, remote key repair.

BMW ISN Read & Write

BMW ISN read and write >> Read CAS ISN

OBD is connecting.

OBDII-KWP successfully connected.

We can perform diagram, read & write DEM ISN, CAS ISN here as well.

BMW F/G Series Program

BMW F/G Series Program >> Read ECU information

VIN and data were successfully read. 

We can click other buttons(start programming, advanced programming, initialize the airbag, initialize the skylight, initialize windows) for programming.

The CAN lights of FEM on Godiag GT100 will change like turning weak while data communication.

Full operation video:

CGDI Key Programmer works with Godiag BMW Test Platform can detect and program FEM BDC box, test whether the BMW key was synchronized.

https://www.obd2shop.co.uk/

How to use CGDI to add a key for E92 BMW by OBD?

Today I’m gonna add a key for a 2009 E92 CAS3 BMW using with CGDI Prog BMW MSV80 tool via OBD. CGDI Prog is quite an amazing BMW key programmer that takes only 3 minutes to do this job.

Now follow me to show the steps:

This is a voltage stabilizer connected to the BMW at 14.2 volts.

This is the CGDI Prog connected by OBD.

I had prepared 2 keys, one is a working key, and the other is a new key. This is the new one to be programmed.

Turn on the ignition, and launch CGDI software to start:

BMW Key Match(OBD) >> CAS1-3+ Key Match >> Read Key Info

OBD is connecting.. reading data.

Pop up the key from the ignition, click “OK”>> Save Key Info >> Select Key5 >> Generate Dealer Key

Put the working key into the CGDI programmer coil, click “Next”... wait until the working key has been read successfully.

Remove the working key, put the blank new key instead in the CGDI programmer coil, click “OK”.

The current programming key is not a smart key, click “No”... Program key successfully!

Look, it is really easy and fast, let me check if the key works. Works perfect, the job has done.

This is a quick tutorial of how to use CGDI Prog BMW MSV80 to add a key for an E92 CAS3 BMW. Other function tests to be updated...

http://blog.obd2shop.co.uk/how-to-use-cgdi-to-add-a-key-for-e92-bmw-by-obd/

2008 bmw e60 with cas3+ no key, which key programmer + how?

Car model and year: 2008 BMW e60 with cas3+

Situation: The owner has no key.

BMW key programmers test reports:
1. Autel IM608

2. Xhorse VVDI2

3. CGDI BMW key programmer

1. Autel IM608 successfully finally: 
Update on this car. I was able to get the key programmed using the Autel. I had to remove the CAS and read the EEPROM. Then I was able to write the key, and use the 64 attempts to get the key to start the vehicle. I got all the way to 58 attempts, but it worked! After I got that key programmed, I attempted to program another through OBD with the working key, and it was still unsuccessful. I am not sure why the car would not accept programming even with a working key, but I am happy I did not have to remove the DME.

Quoted: "After I got that key programmed, I attempted to program another through OBD with the working key, and it was still unsuccessful. I am not sure why the car would not accept programming even with a working key".
That's because dealing with some (maybe all, please correct me if I'm wrong) CAS3++ ISTAP it's not possible to add key via OBD even if we have a working key. Need to do like you did, read EEPROM on the table and then find ISN from the working key.

No it's not the good tool for this CAS3++ ISTAP, other tools are enable to do it by OBD2, just a risky job! ( to downgrade CAS )
IM608 Method is good, safe & recommended. Normally after obtaining IMMO KEY DATA + 1 WORKING KEY, you no need the car to add another key ... ( IM608 tool is not able ) 100%.

BMW no need obd2 to program another key, OBD2 it's just to obtain IMMO KEY DATA!
But you already have this info, made a dealer key with this info + working key & start car ...

2. How I did successfully with Xhorse VVDI2 Programmer?
I've done over a dozen of these, Zed full did not work after downgrading cas I couldn't do much more.

With VVDI2
1). simply downgrade CAS (never had an issue, make sure you have good power.)
2). After downgrading cas, pull cas and EEPROM immo data, make key in vvdi2, write back to cas.
3). Now you need ISN, you have 2 options, try up to 64 times letting it try and figure out ISN for you OR pull and read ISN from DME

I never pull DME on cas3+ ISTAP works 100% with VVDI2.

I could not read EEPROM even after downgrading through OBD (on some I can, the ones I couldn't happen to be 2011 if I remember right), so I proceed to remove CAS. I will have to try ISN through OBD next time. VVDI2 says this type supported in the future when trying to read EEPROM OBD after downgrade (latest updates).

Someone doesn't think so:
.NO
will not lower unless I had the flu thenI'll tell you how it turns out, cas3 ++ surprised me, series 1, old car, with a 3-liter engine, no keys, we can do it
msv80, ECU ISN A4................................................ .................................C4

3. CGDI BMW key programmer reviews:
TESTED ON BENCH, sometimes yes but generally no! I never tested on the car ... For BMW CAS 1>3 I only use CGDI BMW: low price tool who never failed, dealer key cost only £150 for sell to customer half of price you need CGDI BMW !!!
I have VVDI2 FULL, X100pad 2 pro after tested on the bench, I will never use them after bad results...

Enjoy!

www.obd2shop.co.uk

2018 BMW E/F scanner VS VVDI BMW VS CGDI BMW

2018 BMW E/F scanner,  VVDI BMW, CGDI BMW are almost the same at different price comparing with BMW Explorer, which one you decide to have, here 4 feedbacks for you reference.

Feedback 1: 
As i understand 2018 BMW E/F scanner is BMW Explorer clone! Very interested in this because this has EGS ISN reset option that some said will be coming to VVDI2 in next update but that was 3 updates ago so i guess it is not coming..

I considered to get CGDI BMW that does almost the same things for BMW as VVDI2 and much more including this EGS ISN option but CGDI is meant to use with a subscription (Subscription or free if you have CGDI MB or CG Pro 9S12. ) so I don't need that. But 2018 BMW E/F scanner clone tool i would like to get if it works so any feedback from this E/F Scanner working or not working would be appreciated.

I know that buying BMW Explorer would be the right thing to do but it is crazy expensive and while i can't afford to invest that kind of money in tools for now i am willing to take a chance on clone tools like 2018 BMW E/F scanner clone. VVDI2 and CGDI also are not the origin developers of options like FEM key making, ISN reading. That all is coming from BMW Explorer. They have just cloned the service under their own tools.

Feedback 2:
Xhorse made a blue colored Bmw vvdi unit (said this 3 years ago)
That will have these explorer functions.
Will they also upgrade the vvdi2?

If not, i am thinking of buying cgdi bmw, instead of this explorer scanner. It cost a 116euros more.
The description of the bmw cgdi is very similar to the explorer.
I already have the full vvdi2 including Bmw. So i would prefer a vvdi2 update in the near future.

Nice feature on the cgdi bmw is the eeprom adapter, you can plug in. (costs extra)
Would love to see that on the vvdi2.

Feedback 3:
It free in cgdi bmw which is much cheaper in full as only some bmw activation in vvdi2
we will see how good is this e f scanner clone really. i will order full one.


Feedback 4:
All Total: £369  2018 BMW E/F scanner
http://www.obd2shop.co.uk/wholesale/bmw-ef-scanner-ii-full-version.html
very fast seller. It is tested.

More 2018 BMW E/F scanner feedback will be updated in the coming days, please wait.

http://blog.obd2shop.co.uk/2018-bmw-e-f-scanner-vs-vvdi-bmw-vs-cgdi-bmw/

CGDI BMW Key programmer Feedback: Excellent tool

All feedback from owners of CGDI BMW Key programmer, I post here.

An excellent tool so far. no bricks or problems.
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe.
make sure you have proper power on the car

cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with original key and with dump from DDE
cas3+ E60- ok, downgrade and make key with isn from org key

You can reuse an old key and reprogram it, there is a button that says unlock key. I tried and worked with aftermarket key, did not try on an original BMW key to unlock(tested on e60 cas2)
and yes it is safe if downgrade for CAS3+.

Read ISN form MSV80 result OK
Read and wright ISN cas 3 result OK

Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully

Did a 2008 E60 528i it asked for Downgrade it took around 10min no error codes all perfect key works

Instructions for cas4 F10 key programming:
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can none done by obd.
You need xprog or vvdi prog to read the dflash.

FAQ:
Q: CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?
A: No, work like VVDI2 - synchronization every mounth

Attach CGDI BMW Key programmer latest function menu

Article source: http://blog.obd2shop.co.uk/cgdi-bmw-key-programmer-feedback-excellent-tool/

CGDI MB Benz Monster Newest Tokens Policy

CGDI MB Benz Monster Newest Tokens Policy: Subscription A or Subscription B is for your option.

Subscription A: free for 6 months after activation, and 2 tokens every day, after 6 months, you need to pay, 10USD per month for sale, and you can calculate 60 tokens per month.

Subscription B: won't charge when activating CGDI MB, and you have 1 token for free per day, if you want more tokens, you can buy the points for 4USD/per one, and one point for one token, you can calculate password for 4 times per day. (Note: to combine other CGDI devices i.e CGDI BMW, CG-100, CG Pro, you have free points, one device serial number have 1 point for free.)

www.obd2shop.co.uk
Skype: obd2tool.co.uk
Email: sales@obd2shop.co.uk
TEL: +86 13983755934

Article Source: http://blog.obd2shop.co.uk/cgdi-mb-benz-monster-newest-tokens-policy/

Use CGDI programmer to Copy BMW CAS3+ key with working key

Here is for your info: Use CGDI BMW programmer to Copy BMW CAS3+ key with working key.

Procedure:

Step 1. OBD connects vehicle, Click on the "BMW OBD KEY MATCH”

Step 2. Click "Read key info"

Step 3. Please pop up the key from the ignition, the data was read successfully.

Step 4. Save the file

Step 5. Select the key to match and click to generate the dealer key

Step 6. Put the working key into the CG-DI programmer coil

The work key is being read

Step 7. Please put the blank key into the CG-DI programmer coil

We choose to match the ordinary key, click " no "

Note: If the key is a smart key, it will be locked

Step 8. Please wait until the key is programmed

Key matching success

After learning, it can be used normally

www.obd2shop.co.uk