1. 2018 BMW E/F Scanner is more stable than 2013 version
2. Available with 3 options:
1) Basic configuration for diagnosis
2) Medium configuration for diagnosis, cluster calibration, oil reset
3) Advanced configuration for diagnosis, cluster calibration and reset
That is Advanced version = Basic version+ Medium version
All of 3 options have the same outlook like:
E/F SCANNER Basic configuration
Basic features:
•166 types of ECU supported
•Diagnosis and interpretation of error codes
•Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as СО, СН inspections etc.
•Adjustment of mileage and maintenance intervals
•Change/Adjust FA code (currently in test mode)
•Read/Write RAM/FLASH/EEPROM *
•ELV Reset (steering wheel lock)
•Change AIF (indexes of programming) *
•Reading the last saved mileage from ECU
•VIN change *
•New battery registration
* Not for all ECU's
E-series CAS1, CAS2, CAS3, CAS3+ mileage Reset by OBD
Supported model list:
•1-series (E81, E82, E87, E88), 2003+
•3-series (E90, E91, E92, E93), 2004+
•5-series (E60), 2002-2010
•5-series (F10), 2010+ (only DTC reading)
•5-series "Gran Turismo" (F07), 2009+ (only DTC reading)
•7-series (E65, E66), 2000-2008
•7-series (F01, F02), 2007+ (only DTC reading)
•BMW X5 (E70), 2006+
•BMW X6 (E71), 2007+
•Mini Cooper (R56, R57), 2005+
•Rolls-Royce, 2003+
List of supported ECU:
•Body - 65 categories / 121 types; AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP, CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM, KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR, SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF, SSFA, SSH, STVL, STVR, SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM and etc
•Drive - 6 categories / 30 types; CAS, DME, EGS, EKPM, GWS, VTG and etc
•Chassis - 12 categories / 15 types; ASR, CIM, DSC, EDC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM and etc
Reliable source:
E/F SCANNER Medium configuration:
1. Basic features module
3. E-series Coding module
3. E-series CAS1, CAS2, CAS3, CAS3+ mileage Reset
4. E-series keyprog module
5. FEM/BDC mileage module CAS4 CAS4+
6. F-series mileage correction module CAS4 CAS4+
Reliable source:
E/F SCANNER FULL(V2018.12)
1. Basic features module
3. E-series Coding module
3. E-series CAS1, CAS2, CAS3, CAS3+ mileage Reset
4. E-series keyprog module
5. FEM/BDC mileage module
6. F-series mileage correction module
7. FLASH calibration READ/WRITE calibrations for F and G series models
8. ISN reset for F-series HP8 gearbox
9. FEM/BDC keyprog module
10. ISN MSx8x (SIEMENS) for BMW
11. F-Coding module
12. Tricore module for BMW
13. CAS4 CAS4+ F-series keyprog module with F-ISN
