This post is on how to Program BMW FEM BDC Key by using Lonsdor K518ISE Key Programmer.
BMW FEM blade key, test whether the original key can start the door or not.
immobilization->BMW->category by system->FEM/BDC
Step 1.read key info. Read out VIN, type, current key position and kilometers.
Step 2: Prepare FEM/BDC system
Note: This car system doesn’t need to preprocess, can directly make dealer key or go to odometer adjustment!
Whole procedure shown as below.
Step 3: Make dealer key. Please choose the position of key to be generated.
Tick on first option “Use one ignition key to generate dealer key”
Please prepare one ignition key, insert the key into the coil and press “Confirm” to continue.
Done
Please insert the key into the ignition...
Learning key, please keep the key stable.
Key learning done.
Program complete.
Lonsdor K518ISE for sale: http://www.obd2shop.co.uk/wholesale/lonsdor-k518ise-key-programmer.html
Source: https://obd2shopcouk.wordpress.com/2017/10/31/program-bmw-fem-bdc-key-by-lonsdor-k518ise/
Subscribe to:
Posts (Atom)
How to activate CGDI CG100X Programmer
This post will guide you on how to activate CGDI CG100X Programmer . Step 1. Please download and install the newest software: https://mega.n...
-
Good news!! CG100 PROG III Airbag Restore software can be updated to version V4.0.1.0. Here provides you the free download link and the up...
-
CGDI Mercedes Benz Programmer v2.7.0.0 w211 2005 keyless go 1 key present 59 read EIS ok collect data, choose key, other keys voltage...
-
Here is the CGDI MB 2.5.0.0 update info and free download link for you: CGDI MB 2.5.0.0 Update (2018-03-13): 1. Add ELV repair function,...